Off Road Skate Wheels

What skateboard wheels are best for rough roads?

The Best Skateboard Wheels for Rough Roads

  • Shark Wheel 78a Skateboard Wheels.
  • CCS Cruiser 78a Skateboard Wheels.
  • FREEDARE 58mm Skateboard Wheels.
  • Orangatang 85mm Longboard Wheels.
  • Spitfire Formula Four Skateboard Wheels.
  • JOSOPA 52mm Skateboard Wheels.
  • FREEDARE 54mm Skateboard Wheels.
  • Bones Wheels Rough Riders 80a.
  • via

    Are 95A wheels good for street skating?

    88a to 95a have a little less grip but still grip well, making them suitable for rough surfaces and street skating. They are just a bit harder and faster. 96a to 99a are good wheels for all-around use. via

    Are 53mm wheels good for street skating?

    A lower millimeter wheel is usually preferred for street skating, as they are lighter for flip tricks but more difficult to ride on rougher surfaces. The most popular street skating wheel sizes are between 52-54mm. A larger wheel helps you skate rougher ground and ride up transitions easier. via

    Are soft wheels better for rough roads?

    Soft skateboard wheels are suitable for cruising and a comfortable ride. They don't excel at tricks because they bounce a lot and stick to the surface. They deal better with small objects and rough roads. Hard wheels are more for skateboarders that like to perform technical tricks, but not suitable for cruising. via

    How do you skate on bumpy roads?

  • Get an adequate setup – cruiser or longboard with large soft wheels.
  • Maintain decent speed (e.g. 8 – 10 mph) to avoid death stops.
  • Keep an eye ahead of your wheels to dodge very big cracks/rocks.
  • When rolling on sand, gravel, dirt, keep a steady line, avoid tight turns.
  • via

    How do you skate on rough surfaces? (video)

    Are 54mm wheels good for cruising?

    Go for at least 56mm/92A if you want to ride comfortably and do tricks. Go for 58MM+ and 86A (and below) for a better cruising experience. Ricta's at 60mm, 78A durometer and a contact patch of 32mm should provide a smooth ride. Still, if you only want to cruise go with Fatty Hawgs, Orangatangs or OJ Juice. via

    Are 101A wheels too hard?

    The most popular wheels in this category are 99A to 101A. Hard wheels have a very slippery, plasticy feel. They are smooth and fast on smooth surfaces, but are chattery and unpleasant to ride on rough terrain. When it comes to Soft Skateboard Wheels they are usually between 75A and 95A. via

    Are 95A wheels good for tricks?

    Diameter 50-60mm, Durometer 95-101a

    These hard wheels are the best skateboard wheels for park and street skating because they are lightweight, roll fast on smooth surfaces, and slide easily. This makes it easier to do ollies, flip tricks, power slides, and other technical tricks. via

    What wheels does Tony Hawk use?

    The Bones Wheels Tony Hawk 'T-Bones' seen here are a perfect example with a wheel at 58mm in diameter coming in at 84b on the durometer (roughly equivalent to a 104a reading on the more commonly used Durometer A Scale). via

    Why do skate parks have hard wheels?

    Harder wheels tend to be faster while softer wheels are slower because they grip better. Harder wheels are better suited for skate parks and rides on smooth surfaces. Some brands offer a dual-durometer wheel where the inside of the wheel measures one way while the outside of the wheel is either harder or softer. via

    What skateboard wheels are best for asphalt?

    Best Skateboard Wheel for Asphalt Reviews

  • Shark Wheel 2-01-008-01-03 California Roll.
  • Spitfire Bighead Skateboard Wheels.
  • LOSENKA Skateboard Wheels.
  • FREEDARE 60mm Skateboard Wheels.
  • Santa Cruz Skateboard Wheels.
  • Spitfire 2001000154 Skateboard Wheel.
  • FREEDARE 52mm Skateboard Wheels.
  • Ricta Clouds Skateboard Wheel.
  • via

    Can you roller skate on rough roads?

    Inline skates generally allow outdoor skaters to go faster with less effort. Inline skates are great for outdoor use especially if you are skating on pavement, asphalt, sidewalks, rough roads, or even dirt/trails. via

    Is it OK to skate on the road?

    Pedestrians (including skateboarders) are required to use sidewalks rather than the roadway unless there are no sidewalks. If there are no sidewalks, the skateboarder should travel in the left lane of the road, facing traffic, and move off the roadway for oncoming cars. via

    What surfaces can you skate on?

    To prevent injuries, it is very important that riders choose safe places to ride. All surfaces should be checked before riding on them. Skateboard only on surfaces that are smooth without cracks or debris, like garbage or sticks. via

    Can you use cruiser wheels on a skateboard?

    Yes, you can slap a couple of longboard wheels on a regular skateboard, but it has its limitations. The parts don't always go well together (in the first case) and riding it can feel awkward. You need to rise your trucks to avoid wheel bite, make sure your trucks are tight, and bushings shouldn't be too soft. via

    Can u skate on sidewalk?

    You do not need a special license to ride your skateboard on the sidewalk and you should view it as legal unless otherwise posted. You can safely ride your skateboard on the sidewalk as long as you yield to other pedestrians. You are no different than a runner. via

    Are slime ball wheels good?

    Will still slide for tricks easily. These wheels come in a classic 80s shape and are 95a in durometer. This means these wheels are a great choice for the rougher skate parks or for someone who prefers a slightly softer wheel. via

    Are 55mm wheels good for tricks? (video)

    Are 92A wheels good for tricks?

    The 92a is great for my cruiser set up because I can still hit everything at the park with them and they are hard enough for some nice flip tricks. via

    Is there a big difference between 99A and 101a?

    It's a hardness that provides great grip on most street surfaces while retaining speed, pop and a smooth ride. Being slightly softer than the harder 101a, the 99a is slightly more forgiving on impact. 101a duro is more suited to smoother transitional skateparks and ramps. via

    What is 99A skateboard wheels?

    96A-99A Skateboard Wheels

    These are a fairly balanced set of wheels that will adapt to street skating, skatepark riding, bowls, ramps, and nearly all smooth surfaces. The setup is often used by beginners because it provides good grip and moderate speed characteristics. via

    What size wheels should I get for a 8.0 deck?


    Deck Size truck Size Wheel Size
    8.0 7.75 - 8.25 Axles 50 - 54 mm
    8.125 8.0 - 8.25 AXLES 50 - 54 mm
    8.25 8.0 - 8.5 axles 52 - 55 mm
    8.375 8.25 - 8.5 axles 52 - 55 mm


    Are 60mm wheels good for cruising?

    Generally, any diameter between 60mm and 75mm fits cruising. The small ones are ideal for small skateboards, as the larger wheels work best with longboards. But for beginners seeking to have a smooth cruising experience, it's best to use 60mm rollers. via

    Are 95A wheels hard?

    Wheel Hardness: 95A. They are hard wheels and will give you good control for tricks and mobility. High resilient PU infusion processing material, durable and wear-resistant for smooth riding. via

    What hardness wheel should I get?

    Generally speaking, harder wheels are faster, and softer wheels are slower with the added advantage of having more grip. Softer wheels are better suited to street skating; harder wheels are better for smooth surfaces, such as skate parks. Some companies even specially design their wheels for a specific use. via

    Are 99D wheels good?

    These are still softer on the durometer scale compared to Bones SPF (104 Durometer). 99D (usually Blue): The softer of the two Formula Four Durometers are the 99D wheels. They won't be quite as fast on a skatepark as the Red 101D wheels, but will ride smoother in the streets. via

    What wheels does nyjah use? (video)

    Are 101A wheels good for street?

    Anything above 98A will perform well in the street or in the park. Anything softer will probably slow you down. However, if you wish to cruise around on your skateboard and are not much interested in learning tricks, a softer wheel will work well for you. For a good cruising wheel, choose something between 78A and 90A. via

    Is it easier to Ollie with smaller wheels?

    Small wheels make it easier to land tricks, even when they feel a bit sketchy. Bigger wheels will cause you to fall when you land a trick a bit sketchy but smaller wheels still allow you to land a trick without running the risk of hurting yourself. via

    Do risers give you more pop?

    Deciding whether or not to install risers

    Shortboarders may also use them to prevent wheel bite after landing a skate trick, thus prolonging the life of their board. They also have the added bonus of giving your board extra pop, since they add more distance between the tail and the ground. via

    Why do skateboard wheels turn yellow?

    The main reason why the skateboard wheels turn yellow is that the urethane breaks down and degrades from exposure to sunlight. You can also end up with yellow wheels over time as the wheels soak up dirt, oils, and other materials from the ground. via

    What wheels are best for skate parks?

    The best wheels for skate parks need to have at least a Durometer of 100A+ and preferably a size between 53 and 555mm. Harder wheels will perform well in ramps, bowls and verts because they don't have as much friction as softer wheels. via

    Do hard wheels slide easier?

    Finally, the harder the wheel, the easier it will slide. However, it will be hard to control in a long slide and they won't grip around corners very well. Softer wheels are slower but are more comfortable to skate. They provide a smooth ride over most surfaces and grip well when going around corners. via

    Can you ride a cruiser at a skatepark?

    You can use a cruiser for skating parks, skate plazas, and, downhill spots, and street spots. That said, doing tricks on a cruiser is more challenging than on a street deck because of its shape. via

    Can skateboard wheels melt?

    Cores. Most quality wheels out there have a plastic core that the bearings sit in. The core spreads the heat through the wheel and stops the bearings (which get super hot at speed) melting the Urethane. It is VERY BAD when this happens – melting (or “puking”) a wheel can be very dangerous! via

    Leave a Comment